削片机主轴的断裂与研制

削片机是木材废料和林区剩余物综合利用的重要机械设备,给林区带来了显著的经济效益和社会效益。黑龙江省友好木材综合加工厂Ⅱ号削片机,使用43个月后其主轴完全破断。本文在实地调查分析的基础上,对主轴进行了受力分析和断裂失效分析,研制了新主轴。投产一年来,通过对主轴的径向跳动测试和刀盘端面跳动测试表明,新主轴较原主轴的结构合理,工作正常,给工厂带来了较大的经济效益。     

Analysing the Rockmass Permeation of a Low-medium Radioactive Waste Disposal Field

The fractures distribution and fracture rock mass permeation research is the premise condition that to study groundwater movement and pollutant migration in fracture rock mass in bed rock area, which includes the dominance orientation of fracture that groundwater fluxes in it, the brisk zone distribution of fracture water and the permeability calculation of rock mass. This paper mainly analyzes the fracture distribution and the dominance orientation of fracture and the permeability of a low-medium radioactive waste disposal field based on its rich geologic record. The following results are found through Statistical analysis and comparison calculation.The active zone of fractural water in bed rock is an active channel of active nucleus migration. Tthe headrace fracture of disposition have a dominant orientation. The penetrating coefficient tensor in bed rock fracture is also calculated.     

CONGENITAL DISLOCATION OF THE DEEP DIGITAL FLEXOR TENDON ASSOCIATED WITH HYPOPLASIA OF THE SUSTENTACULUM TALI IN A THOROUGHBRED COLT

An 11-month-old Thoroughbred colt was presented with a hard swelling at the proximal third of the right 4th metatarsal bone. A medial dislocation of the deep digital flexor tendon ( flexor digitorum profundus ) was also observed on the same leg. On the plantaroproximal-plantarodistal projection of the calcaneus, there was flattening and shortening of the sustentaculum tali. The smooth bony proliferation at the proximal third of the right 4th metatarus was compatible with a chronic splint bone fracture. This report describes a medial deep digital flexor dislocation associated with hypoplasia of the sustentaculum tali .     

A COMPARISON OF RADIOGRAPHY, COMPUTED TOMOGRAPHY, AND MAGNETIC RESONANCE IMAGING FOR THE DIAGNOSIS OF PALMAR PROCESS FRACTURES IN FOALS

The relative sensitivity of radiography, computed tomography, and magnetic resonance imaging for detecting palmar process fractures of the distal phalanx in foals was determined and the imaging findings were compared with histomorphologic evaluations of the palmar processes. Compared to radiography, computed tomography and magnetic resonance imaging did not improve the sensitivity for detection of palmar process fractures. Statistical agreement for palmar process fracture diagnosis was excellent among the three imaging modalities. Histomorphologic evaluations were more sensitive for diagnosis of palmar process fracture than any of the imaging modalities. Three-dimensional image reconstructions and volume measurements of distal phalanges and palmar process fracture fragments from computed tomography studies provided more complete anatomical information than radiography. Magnetic resonance imaging confirmed that the deep digital flexor tendon insertion on the distal phalanx is immediately axial to the site where palmar process fractures occur, and differentiated cartilage, bone, and soft tissue structures of the hoof.     

SiC-W层状复合材料增韧机理分析

为分析SiC－W层状复合材料增韧性机理，对以SiC陶瓷胶片为基体层，金属W为夹层的SiC－W层状复合材料进行了力学性能测试，并用电镜法得到其断面显微结构照片。试验结果表明：1）与SiC单材料断裂韧性相比，SiC－W层状复合材料的断韧性增大；2）在基体层厚度不变，夹层厚度为10－50μm时，SiC－W层状复合材料的断裂韧性随夹层厚度的增加而增大，而抗弯强度随之下降；3）材料在不同方向断裂韧性不同。SiC－W层状复合材料裂韧性增大的原因是：1）夹层晶体颗粒大于基体体层的，其沿晶断裂形式延长了裂纹扩展路径；2）断裂过程中有晶片拨出消耗了能量；3）二级层状结构中片层间的微裂阻止了断裂裂纹的扩展。     

高强度管道钢氢致开裂门槛应力测定

采用恒载荷和慢应变速率动态拉实验方法。测定了X80管道钢在不同充氢条件下的氢致开裂门槛应力和断裂应力，测试结果表明，X80管道钢在0．5mol/L H2SO4 0.25g/L As2O3溶液中充氢时，试样中可扩散氢浓度（C0）和充气电流的方根（√i）呈线性关系，不同充氢条件下慢应变速率拉伸时断裂应力均随氢浓度升高而下降，恒载荷下氢致滞后断裂门槛应力随氢浓度的对数而呈线性下降。     

Surgical repair of skull fractures in four horses using cuttable bone plates.

Three horses with severely comminuted, open facial bone fractures and one horse with a comminuted, open orbital rim fracture were referred for treatment. Severe facial bone asymmetry and epistaxis were apparent in all cases and subcutaneous emphysema was present in two, however physical and neurological examinations were otherwise normal. Radiography and endoscopy were of some use in assessing the degree of damage, although the true extent of the damage was more apparent at surgery. Surgical reduction of the fractures was recommended to maximise cosmetic and functional outcome. After surgical debridement and reduction of the fractures the bone fragments remained unstable and were not amenable to stabilisation with interfragmentary wires alone, so 2 mm cuttable bone plates were used to maintain fracture alignment. Screw migration occurred in three horses and in one of these horses the plate had to be removed. Other complications were minor and in all horses the fractures healed with good cosmetic and functional outcome. The use of cuttable bone plates should be considered as a reasonable alternative to inter-fragmentary wiring for unstable, comminuted fractures of the facial bones, even where fractures are open.     

Palmar or plantar process fractures of the distal phalanx in riding horses: 22 cases (1994–2003)

No case series exists in the literature describing palmar/plantar process fractures (PPFs) of the distal phalanx in a nonracehorse population. We aim to describe the distribution of these injuries, together with their clinical, radiographic and scintigraphic features. In a retrospective case study, horses were selected based on radiographic evidence of a PPF. Data were collected relating to clinical and lameness examination, radiography, scintigraphy, management and follow‐up information. Oblique and flexed oblique radiographic views of the distal phalanx are the most sensitive in detecting PPFs of the distal phalanx and this study concluded that fractures of palmar or plantar process are likely to be missed in horses showing mild lameness if oblique radiographic views of the palmar process are not included.